Welcome to Steel Information



Acrylonitrile Butadiene Styrene / Polyvinylchloride Alloy - ABS/PVC Alloy

Polymer Type

Thermoplastic

Advantages

Inherently flame resistant. Higher maximum operating temperature, notched izod impact strength and HDT than unmodified UPVC. Lower mould shrinkage than unmodified ABS.

Disadvantages

Difficult to process compared with ABS. Reduced surface gloss. Lower notched izod impact strength than ABS (medium impact).

Typical Properties

Property

Value

Density (g/cm3)

1.25

Surface Hardness

R109

Tensile Strength (MPa)

50

Flexural Modulus (GPa)

2.7

Notched Izod (kJ/m)

0.10

Linear Expansion (/°C x 10-5)

6

Elongation at Break (%)

20

Strain at Yield (%)

8

Max. Operating Temp. (°C)

60

Water Absorption (%)

0.2

Oxygen Index (%)

28

Flammability UL94

V0

Volume Resistivity (log ohm.cm)

15

Dielectric Strength (MV/m)

23

Dissipation Factor 1kHz

0.040

Dielectric Constant 1kHz

3.0

HDT @ 0.45 MPa (°C)

75

HDT @ 1.80 MPa (°C)

70

Material. Drying hrs @ (°C)

3 @ 70

Melting Temp. Range (°C)

200 - 210

Mould Shrinkage (%)

0.45

Mould Temp. Range (°C)

40 - 60

Applications

Computer housings. Domestic appliance housings. Printer components, cash register bases. Plumbing components

0 Comments:

Post a Comment

Subscribe to Post Comments [Atom]

<< Home