Welcome to Steel Information



Walk-in Oven is used for heat-treating steel parts

No. 835 electrically-heated walk-in oven features maximum temperature of 1,200[degrees]F provided by 120 kW power, installed in Incoloy-sheathed tubular heating elements. With aluminized steel exterior, 16 ga SS interior, 10 in. thick insulated walls, and 48 x 72 x 72 in. workspace, oven includes 10,000 cfm, 71/2 hp recirculating blower. Safety and control features include 325 cfm powered forced exhauster, digital indicating temperature controller, and airflow safety switch.

********************

No. 835 is a 1200[degrees]F electrically-heated walk-in oven from Grieve, currently used for heat treating steel parts at a customer's facility.

Workspace inside this oven measures 48" wide x 72" deep x 72" high and a maximum temperature of 1200[degrees]F is provided by 120KW power, installed in Incoloy-sheathed tubular heating elements. A 10,000 CFM, 7 1/2-HP recirculating blower provides combination vertical/horizontal airflow to the load.

No. 835 features an aluminized steel exterior, 16 ga. stainless steel interior and 10" thick insulated walls, comprising 2" of 1900[degrees]F block and 8" of 10 lb. density rockwool insulation, as well as a 7" insulated floor with integral truck wheel guide tracks.

Safety and control equipment on this Grieve oven includes a 325 CFM powered forced exhauster, digital indicating temperature controller, manual reset excess temperature controller with separate contactors, recirculating blower airflow safety switch, and a 4-pen circular chart recorder.

For more information, please contact: THE GRIEVE CORPORATION, 500 Hart Road, Round Lake, Il 60073-2898. Phone:(847)546-8225. Fax: (847)546-9210. Web: www.grievecorp.com. Email: sales@grievecorp.com. Attention: Frank Calabrese.